Last Updated on June 7, 2023 by Georgie Smith
What better tool to cut logs than a chainsaw? Chainsaws, however, are bulky and large, and carrying one around may be a hassle or seem dangerous to others.
If you place your chainsaw inside a carrying case, it is much safer to move it around, and you won’t creep out any children along the way (and parents too!) The case also serves as storage and protection for the equipment.
Before you take your new equipment out to use for the first time, watch safety videos and read as much material that you can find. You will want and need to learn all you can because a chainsaw is extremely dangerous.
- Best Chainsaw Bar: 2023 Unbiased Reviews (Top Picks) and Guide
- Best Chainsaw Trousers for Climbing: Chainsaw Chaps Reviews and Guide
- Best Chainsaw Mill: 2023 Reviews (Top Picks for the Money) and Guide
When handled correctly, a chainsaw will be your best friend when it is time to cut trees down as well as cutting firewood. Do you need help choosing the best chainsaw case for your work? We’ve listed our top 5 carrying cases for 2019.
Top 5 Best Chainsaw Cases for Stihl/Husqvarna/Poulan/Echo/Craftsman (Small and Large):
Husqvarna 100000107 Powerbox Chainsaw Carrying Case for 455 Rancher, 460, 372XP & 575XP
- It fits all Husqvarna chainsaws (including the 372XP and 575XP models).
- 18-20-inch scabbard.
- Enough room to hold Husqvarna’s exclusive filing equipment
- Leash system
- Comes with a tool chest design
- Weighs around nine pounds
- 90-day warranty
This Husqvarna Powerbox Chainsaw Carrying case can fit any Husqvarna chainsaw model from the 136 up to the 372XP and 575XP models.
Its sheath is 18-20 inches in length which are helpful in protecting your chainsaw’s blade from rust and other elements. It also protects you from potential cuts and bruises when transporting or carrying the chainsaw to the felling site.
The also has enough room in the case to carry accessories. The case can hold all of the following:
- Chain Oil
- Quart Bar
- 4 oz 2-cycle oil
- Spark Plug
- A File Handle with a Flat or Round File
- Scrench Combination File Guide
- Operator’s Manual
- Logger’s Filing Vise
Husqvarna includes replacement handles when you purchase a case. Also, expect your chainsaw to fit snugly inside the case, thanks to Husqvarna’s closed husky leash system. So, when driving on a rough road, your chainsaw won’t bang and jump around in the case.
Buy from Amazon
Poulan Pro 952031152 18- to 20-Inch Gas Chain Saw Carrying Case
- The case carries Poulan gas chainsaws.
- Can also fit large chainsaws of other brands
- Scabbard if 18-20 inches.
- The case weighs around 8.8 pounds.
If you own a Poulan gas-powered chainsaw, this is one of the best large cases on the market for your saw. It will securely carry a Poulan gas-powered chainsaw with a blade if 18 to 20 inches.
Large chainsaws are too heavy for lightweight cases. At 8.8 pounds in weight, it is the second most massive case on this list. Also, the case is from a sturdy material which will ensure protection for your chainsaws.
You will have room in the case not only for your chainsaw, but also for the bar oil, an extra chain, and a container or two of the gasoline additives.
This Poulan Pro versatile case works with many types of chainsaws. Most patrons who have bought and reviewed this product noted how perfectly it fits their non-Poulan-brand chainsaws. There is more information and the most affordable prices with excellent service right here:
Buy from Amazon
Husqvarna 100000101 Classic Chain Saw Carrying Case
- Double wall construction.
- Fits the chainsaw models: 36, 41, 42, 45, 49, 51, 55 Rancher, and 242, 246, 254, 340, 351, 353, and 346XP.
- This product weighs around 6 or 7 pounds.
This Husqvarna classic chainsaw carrying case is double-walled in construction. It is extra durable to protect your chainsaw from damage during transport. The Husqvarna 100000101 fits not only most Husqvarna saws but also Rancher and XP brand saws. It also comes with a padlock tab for security.
Storage capacity is one of the main features which increase the convenience of a case. This case comes with compartments for chainsaw tools, accessories, and oil storage. If you would like more information as well as place your order on the number one e-commerce around the globe, click here:
Buy from Amazon
New HUSQVARNA 5768591-01 Canvas Chain Saw Carrying Case/Bag Up to 20″ Grey OEM
- Built from heavy-duty material.
- Detachable plastic bottom for easy clean-up.
- Can accommodate chainsaws with a bar of 20 inches.
- Weighs around 3 pounds.
If you walk long distances with a chainsaw, you know how tiresome it is to carry a bulky case. When looking for something light with a long holder, this is the case for you. This product accommodates blades of 20 inches, and it only weighs 3 pounds. It is super light compared to most cases on the market.
Oil sometimes will drip from the saw and form small puddles or splotches on your floor, which is a pain when you try to clean it afterward. This case comes with a built-in plastic tray that catches the dripping oil, which you can remove for draining and put back on later.
Buy from Amazon
Jonsered″ Chainsaw Carrying Case
- The case comes with a removable casing for longer bars.
- Padlock hole included.
- Weighs 8.5 pounds.
- dimensions: 20 x 12 x 12 inches.
- Two doors access with tool storage pockets
The holder is part of the case that sheaths the blade. Most chainsaw cases can only hold chainsaws of a certain length because of limited scabbard length. If your chainsaw is somehow 21 inches long, it cannot fit into a case that is less than at least 20 inches.
However, with the Jonsered chainsaw carrying case, you can carry chainsaws of many sizes because its casing is detachable. You can always detach the sheath if the chainsaw’s blade is too long. It also provides a padlock hole, which means you can lock the case to secure your chainsaw.
Most experienced chainsaw operators always carry their tools, so they can fix any issues that may come up when working. This chainsaw case has tool storage pockets where you can securely keep your gadgets out more about this product as well as buy yours today by clicking here:
Buy from Amazon
How to Choose a Chainsaw Case
If you are looking for a case for your chainsaw, here are some factors to keep in mind when browsing.
Some cases come with compartments for not only your saw but for accessories as well. These compartments come in handy if you don’t want to bring a separate toolbox or bag just for utilities. There is a range of options to suit your requirements.
Your work environment and type of work will determine the kind of case you may need. For example, if you’re out in the rugged terrain of a forest to cut trees, a hard case may be a more suitable choice.
If you’re at home taking care of a few small shrubs and trees, a soft or lightweight carry case could be all you need. You may also need a case with space for tools and products if you’re a professional carrying one out of work in the field.
If you need to travel on the job and your chainsaw is bound to bounce around in the back of a truck, you will need a durable case.
Often chainsaw carry cases come double-walled for extra strength. Others feature a type of ‘seat belt’ or leash within the case to strap your chainsaw down and prevent it from banging the walls of the case. However, if it’s only staying in the garden shed, a soft case is sufficient.
The carry case you obtain often depends on your budget, but the key is not to skimp on quality. With this comprehensive guide, we want to show you the best chainsaw cases with value for your money.
Do Stihl Chainsaws Come with A Case?
Depending on your local dealer and what promotions Stihl is offering, you may get a chainsaw carrying case along with a file, file handle, chain, and oil.
With a non-professional model, you may get a chain, scabbard, guide bar, and screwdriver.
With a professional model saw you may get a toolkit, a filing kit, a scabbard, goggles, gloves, and a Stihl chain. If you are lucky, the dealer may throw in a bag or case to carry all that.
Chainsaw Leaks Oil in Case
Leaks are never welcome, especially in your tools of the trade. Before dismantling your favorite power tool, there are a few simple steps you can take to troubleshoot any leaks.
Find the Source
It’s normal to have a minute amount of oil under the saw after you shut it off but if there is a significant leak, it’s important not to use your chainsaw until you’ve identified the issue.
Unless you are entirely comfortable and experienced with working on your chainsaw, have an expert technician repair any issues for your safety. Before tinkering with your chainsaw, take extra safety precautions. Make sure the engine is off and wear gloves and protective eyewear.
Check the oil level in the tank and see if it has gone down noticeably. If so, you likely have a problem. However, if the leak is slight and your oil tank remains at the same level, it’s probably a regular part of the chainsaw’s operation.
During operation, some of the oil from the fuel tank seeps onto the bar and chain. Some chainsaws have no tray to capture this oil, so it’s natural for this to drop to the ground after an operation.
An oil leak in a chainsaw could either be a simple matter or a symptom of a more complicated issue. There are more than a few possible causes of an oil leak, each with its indications.
1. Pressure accumulation in the oil tank
One of the most straightforward reasons is that your oil tank is building up pressure during use. Fixing this problem is only a matter of unscrewing and re-screwing the oil cap to release pressure. You can also inspect the rubber ring between the chain and oil reservoir. If it appears to have shrunk due to heat exposure over time, replace it.
2. Crack in Oil Tank
If neither of those fixes resolves the leak, there could be a crack in the oil tank itself. Empty the tank then fill it with water or thinner oil to check where the liquid is leaking out. You can either seal any cracks in the shell or replace the entire tank with a new one.
3. Storage orientation
If the leak only happens while not in operation but during storage, it could be a matter of the way you’re storing it. Try placing cardboard underneath the chainsaw the next time you store it so that you can pinpoint the exact part of the tool leaking.
Fortunately, most cases of a chainsaw oil leaks are simple to solve. Even if an oil tank or rubber part needs changing, you can always purchase the replacements in your local hardware store.
Electric Vs. Gas-Powered Chainsaws
Knowing the differences between an electric versus a gas chainsaw can help better determine which style is right for you.
- Electric chainsaws are light and compact, so they’re not a burden to carry.
- They are quieter than gas chainsaws.
- Don’t leave the smell of gas in their wake. You don’t have to keep worrying about refueling and mixing oil and gas.
- Easily starts with the touch of a button
Electric chainsaws are best for sprucing up trees, cutting small logs, trimming limbs, and other cutting tasks around your yard. With little maintenance and clean energy, an electric chainsaw is suitable for suburban homeowners and individuals not comfortable with gas engines.
Even if electric chainsaws are smaller and lighter to carry, most models lack the stamina and power to cut down large trees. If you must cut big trees on your property, a gas model is your best bet.
Electric chainsaws come in corded and battery-powered types. Lack of mobility is a disadvantage of corded saws, and battery-powered chainsaws often lack the power of corded ones, limiting what you can cut.
- A gas chainsaw is ideal for heavy-duty work.
- If you work on a forestry property or want to get a chainsaw for professional use, a gas chainsaw is your best bet. These can cut through massive trees and turn them into firewood.
- Gas saws also come with a variety of blade lengths for different kinds of cutting jobs.
- Unlike an electric chainsaw, you won’t run out of battery life. You can cut longer if you have a gas supply.
Gas saws are often substantially heavy, which can create fatigue. They are also louder and noisier than electric chainsaws and require you to mix oil and gas. There is also an odor of gas while in use.
Finally, they are often more expensive than electric chainsaws, making them less appealing to beginners.
Frequently Asked Questions:
What are some safety tips for transportation, handling and storing chainsaws?
- Wear personal protective equipment when handling chainsaws to prevent injury to yourself or others.
- It is extremely hazardous to carry a chainsaw while the engine is running. Shut off the chainsaw motor before putting it down or when moving it for more than a very short distance.
- Engage the chainsaw brake when carrying the chainsaw around.
- Use a casing to cover the chain blade when transporting or moving a chainsaw.
- Let the chainsaw cool before moving.
- Carry the chainsaw with the blade pointing behind you. Ensure the sheath or scabbard is on, and the muffler is away from the body.
- Do not carry a chainsaw on your shoulder unless you remove the chain.
- Use a carrying case to avert damage to the saw during storage and transit. The case also delivers suitable storage for the owner’s manual and tools.
- Drain all fuel into an approved safety container before storing the chainsaw for extended periods.
- Store your chainsaw and power tools in a cool, dry place.
- Also, read and review the manufacturer’s manual for added safety instructions and operation guidelines.
What safety measures should I take when fueling a chainsaw?
- Follow the manufacturer’s manual for the oil/gas mixture.
- Do not refuel a running saw. Turn it off first.
- Do not refuel a hot saw. Let it cool first.
- Use a funnel or spout for pouring to prevent any spills.
- Mix fuel in a well-ventilated area. Keep a well-maintained fire extinguisher nearby.
- Do not smoke while refueling. Keep away any ignition sources.
- Only use safety containers for dispensing and storing chainsaw fuel that have the approval of official standards
What are valuable tips to know when using chainsaws?
- Only use chainsaws if you have proper training.
- Read the owner’s manual carefully for your safety.
- Make sure you understand the instructions entirely before trying to use any chainsaw.
- Review relevant health and safety legislation before using a chainsaw.
- Adjust, use, and maintain saws conferring to the manufacturers’ directions.
- Operate the chainsaw in outdoor or well-ventilated areas only.
- Wear personal protective clothing and equipment.
- Ask your dealer questions if you have any doubts about doing the work safely. Safety procedures that you follow will also depend on the work environment (e.g., on the ground or at height in a tree) and on the presence of snag, slip, trip, and fall hazards.
- Only run saws when you are alert and well-rested. Exhaustion causes carelessness.
- Have all required supplies, tools, and accessories with you before you start the work.
- Be aware of your surroundings – underwood, terrain, weather conditions, wildlife, power lines, buildings, vehicles, and other people.
What is the Dos and Don’ts When Cutting With a Chainsaw?
- Plot each job before you start. Arrange to have professional help if needed.
- When carrying a chainsaw to the work site, grip by the front handle, with the muffler away from your body and the blade bar sheathed and pointed behind you.
- Be aware of the location of the persons working with you always.
- Use the correct saw with the proper power, weight, and bar length for the job.
- Work the chainsaw in a two-handed grip with all fingers firmly holding the handles. Firmly position both feet on the ground.
- Ensure that the chain does not move around when the chainsaw is hanging.
- Maintain power level throughout each cutting.
- Turn off the chainsaw before doing any maintenance or refueling.
- Wear safety gloves when sharpening the chain.
- Keep your saw clean of dust, dirt, sawdust, and oil.
- Do not leave a running chainsaw unattended.
- Do not cut alone in remote areas.
- Do not start a chainsaw when it is resting against or near any part of your body.
- Do not refuel a chainsaw within 3 m of a fuel storage container.
- Do not stand directly behind a running chainsaw.
- Do not carry a chainsaw while it is running.
- Do not touch the muffler during or right after the operation. Skin burns may result.
It’s impractical for one to use a chainsaw but not own an accompanying case regularly. A good case is vital for proper transportation and storage of your saw. Otherwise, you will expose your saw to wear, tear, rust and other kinds of decaying elements.
If you must travel a distance to the place where you are working, you can’t do without a case. The reason being it would be hazardous walking around with an exposed chainsaw. You might also risk accidentally injuring yourself or someone else on the way.
When it comes to buying a carry case for your chainsaw, consider many factors before jumping to get one. Consider your work environment, your type of work, durability requirements, storage requirements, and budget.
We hope this buying guide and review has enlightened you on what to look out for when acquiring a chainsaw case. If you are looking for the right case, any one of the five best chainsaw cases are all proven in durability, quality, and customer satisfaction.
If you have used any of these chainsaw cases before, we would love to hear from you. Share your experience with us in the comment section below. If you found this article helpful, we’d also like it if you shared it on your social media outlets.
Know anyone who is in need a quality product like the ones in this review? Please show some care by sharing this post with them. Do not forget to post your views in the comment section below.