DEWALT 745 Vs. 7480 Vs. 7490: Reviews And Comparison Guide (2023)

Last Updated on April 28, 2023 by Georgie Smith

This post delved deep into the world of table saws, precisely the DeWalt models. There are various models of table saws from the company, but we made a comparison of three of their top models. This review and comparison x-rayed the DeWalt 745, 7480, and 7490. After reading this post, you will have adequate knowledge to buy any of the models.

The DeWalt Company was started in 1923 by Raymond E. DeWalt, the inventor of the radial arm saw. This American company has over the years become a worldwide brand. They manufacture power tools and hand tools for various industries including construction, manufacturing, and woodworking industries.

DeWalt happens to be a trading name of Black & Decker (U.S.) Inc., a subsidiary of Stanley Black & Decker.

The company multiplied and reorganized and re-incorporated in 1947 as DeWalt Inc. The American Machine & Foundry Co., Inc. bought the company in 1949, and sold it to Black & Decker in 1960. After the acquisition in 1960, the company continued producing radial arm saws and other large stationary, power equipment, and so on.

Between then and today the company has metamorphosed into an international brand. The yellow and black colors of the DeWalt also feature on safety signs and symbols. This color makes the popularity of the brand reach the top. More than the popularity, their tools are safe, powerful, and handy.


Free Trial





Stainless Steel

Wood, Plastic

Corded Electric

Weight ‎65 Pounds



High Speed Steel


Corded Electric

Color Multi




Corded Electric

Easy to fold

Weight 42.6 pounds

Getting to Know the DEWALT 745

Getting to Know the DEWALT 745

When you need a compact, and portable job site table saw the DeWalt DW745 foots the bill. This unit weighs only 45 pounds which makes it the most portable saw in its class. This versatile unit comes with a 15A high-torque motor that delivers the power needed for tough jobs. No hardwood or pressure-treated lumber can stand the DW745.

The DW745 comes with a 10-inch blade that spins at a no-load speed of 3,850 rpm. When you need quick clean cuts, look no further than the DW745. Aside from other features, the saw’s exclusive fence configuration enables a substantial 20-inch rip capacity.


  • Amps: 15 amps
  • Arbor Size: 5/8 inches
  • Blade Diameter: 10 inches
  • Depth of Cut at 45º: 2-1/4 inches
  • Depth of Cut at 90º: 3-1/8 inches
  • Dust Port Diameter: 2-1/2 inches
  • Rip to Left of Blade: 12 inches
  • Rip to Right of Blade: 20 inches
  • Max Width of Dado: N/A
  • No Load Speed: 3,850 rpm
  • Power Tool Type: Corded
  • Weight: 45 lbs

Unique Features:

  • Powerful Motor: It comes with a 15A, 1,850-Watt powerful motor which can rip through hardwoods without hindrance. The motor ensures high performance in all applications.
  • Steel Roll Cage: This cage protects the blade from objects dropping on it or impact from colliding objects.
  • Cast Table top: with the tabletop, you can be sure of an accurate and precise finish.
  • Overload Protection System: Be it hard, wet, dry, frozen or any other wood condition, the overload protection system aids dominant performance on any of them.
  • Quick Bevel Lock: the lock allows easy and accurate adjustments.
  • Rack and Pinion Fence Rails: This aid fast, smooth, and accurate adjustment
  • Telescoping Fence Rails: this retract to create a small, portable package
  • Compact Design: At 45 pounds, you can easily lug the DW745 you on and off the job. The weight makes this table saw the most portable in its class. It does not include a stand, and you can easily lug it on and off the job.
  • Fence System: the fence system provides 610mm of rip capacity in a portable design for cutting large sheets of materials to size.
  • It comes with a quick, tool-free adjustment with the Site-Pro modular guarding system.
  • Others: It comes with a 24-tooth series 30 saw blade, miter fence, two-blade spanners, parallel fence, push stick, and dust reducer.

All About the DEWALT 7480


When you need a portable, yet powerful table saw, consider the DWE7480. It comes with a durable 15A motor with 4,800 rpm, which makes it rip through hardwood with ease. This unit weighs only 48 pounds, which makes it easily moveable back-and-forth jabs. The DWE7480 comes with adjustable rear feet, which are designed to level the saw on uneven work surfaces.

To reduce friction and improve the smoothness of cutting, the table surface of this unit comes coated. It rips at 24 inches maximum to the right of the blade – it cuts more compared to the DW745. It cuts a variety of larger shelving and trim materials. You can store your items in the onboard storage of this unit for easy access.


  • Amps: 15 amps
  • Arbor Size: 5/8 inches
  • Blade Diameter: 10 inches
  • Depth of Cut @ 45º: 2-1/4 inches
  • Depth of Cut @ 90º: 3-1/8 inches
  • Dust Port Diameter: 2-1/2 inches
  • Rip to Left of Blade: 12 inches
  • Rip to Right of Blade: 24 inches
  • Max Width of Dado: N/A
  • No Load Speed: 4,800 rpm
  • Power Tool Type: Corded
  • Weight: 48 lbs

Unique Features:

  • Re-designed motor: It comes with a durable 15A motor that can rip through hardwoods easily at 4,800 rpm no load speed. It works with increased capacity compared to previous table saws.
  • Metal Roll Cage: This offers greater durability than plastic bases. It also protects the blade from physical damage.
  • Cast table top: with the tabletop, you can be sure of an accurate and precise finish.
  • Site-Pro Modular Guarding System: This allows tool-free adjustments of the guarding components appropriate for each application.
  • Blade Adjustment: you can adjust the blade from 0 to 45 degrees usable for bevel applications.
  • Adjustable Rear Feet: The unit comes with adjustable rear feet for working on uneven work surfaces.
  • It comes with Rack and Pinion telescoping fence.
  • Telescoping fence rails: these retract to create a small, portable package
  • Portable: It weighs only 48 pounds, and because of that, you can easily move it on and off the job.
  • It comes with a Quick, tool-free adjustment with the Site-Pro modular guarding system.
  • Others: It comes with a 24-tooth series 30 saw blade, blade guard, miter fence, two-blade spanners, parallel fence, push stick, and dust reducer.

All About the DEWALT 7490

All About the DEWALT 7490

When you require a table saw with convenience, flexibility, and a stand, go for the DWE 7490X. This unit comes with a rack and pinion telescoping fence and rails. It has patented material support for narrow rip cuts and 28 inches of rip capacity for the seamless cutting of massive wood.

The DWE 7490 comes with a flip-over fence for narrow rip cuts. It also comes with telescoping fence rails which retract to make the unit portable.

The DWE 7490 comes with a 15A high-torque motor with enough power to cut pressure-treated lumber and hardwoods. It cuts 3-1/8 inches depth at 90 degrees and 2-1/4 inches depth at 45 degrees. It comes with a compact folding stand for easy stand-alone job site usage. The durable DWE7490 can execute heavy-duty jobs.


  • Amps: 15 amps
  • Arbor Size: 5/8 inches
  • Blade Diameter: 10 inches
  • Depth of Cut @ 45º: 2-1/4 inches
  • Depth of Cut @ 90º: 3-1/8 inches
  • Dust Port Diameter: 2-1/2 inches
  • Rip to Left of Blade: 16-1/2 inches
  • Rip to Right of Blade: 28-1/2 inches
  • Width of Dado: 13/16 inches
  • No Load Speed: 4,800 rpm
  • Power Tool Type: Corded
  • Weight: 58 lbs

Unique Features:

  • High-Torque 15A Motor: The motor of the DWE7490 has enough power due to its high torque to cut various wooden materials easily.
  • Telescoping Fence: the exclusive telescoping fence can deliver 24-1/2-inch rip capacity without sacrificing portability.
  • Adequate for heavy-duty assignments
  • Dust Collection: The two inch-dust collection port easily connects to a vacuum for efficient dust extraction
  • Flip over Fence: this allows for narrow rip cuts
  • A 21-7/8-inch X 26-3/8-inch table provides material support
  • It comes with improved airflow and offers electronic feedback
  • OthersIt comes with a 24-tooth carbide blade, blade guard, folding table stand, miter fence, push stick, rip fence, two-blade spanners, parallel fence, push stick, and dust reducer.

When three of the DEWALT models of table saws go head-to-head, we have the following revelation:

DEWALT 745 vs. 7480 vs. 7490: What works and the Differences

The DW745 comes with Site-ProModular Guarding System. You can adjust the guarding components tool-free depending on your required application.

With 20” of rip capacity, this baby handles varieties of larger shelving and trim materials. It features a metal roll cage for job site durability.
The DWE7480 comes with Site-Pro Modular Guarding System. It features fast and accurate fence adjustment and guarding components that can be adjusted tool-free.

With a 15A motor, this unit has a 24” rip capacity that affords it the ability to cut large and hardwood materials. The tool comes with a metal roll cage for job site durability.
The DWE7490X comes with Scissor Stand and is powered by a 15A motor. The tool has 28-1/2 rip capacity which means it can cut large and hardwood with ease.

It also features a fast and accurate fence and tool-free guarding components.

This compact and lightweight table saw comes with a metal roll cage and folding stand which make for job site durability.
Unique Features:

Site-Pro Modular Guarding System for tool-free adjustments

The rack and pinion fence rails aid fast, smooth, and correct fence adjustment

Telescopic fence rails for portability creation

Onboard storage for easy access to components of the unit

Metal roll cage base for greater durability compared to a plastic base

For bevel cuts, the shoe bevels from 0 to 45 degrees
You can easily move the device because of its light weight of 45 lbs.

Adjustable rear feet for saw leveling on uneven work surfaces

Comes with a dust port which allows a 2-1/2” vacuum hook up

Comes with a 24-Tooth carbide blade for quality and prolonged blade life

The table comes coated to reduce friction thereby aiding smoother cuttings
Unique Features:

Features rack and pinion telescopic fence rails which make fence adjustments fast, effortless, and exact

The site-pro modular guarding system makes for tool-free adjustments

It comes with a 15A 4,800 RPM motor that rips through hardwoods with ease.

Onboard storage for ease of access to site-pro components and push stick

Metal roll cage increases their durability

The blade is adjustable from 0 degrees to 45 degrees for bevel-related applications.

Based on its light weight of 48 lbs. it can move quickly for external jobs

This machine comes with adjustable rear feet for saw leveling on irregular work surfaces.

Features dust port which allows for 2-1/2” vacuum hook-up for minimal clean-up.

24-Tooth carbide blade enhances cut quality and longer-lasting blade life

Comes with a coated table for smoother cuts by reducing friction.
Unique Features:

It comes with a rack and pinion telescoping fence rails that makes fence adjustments fast, smooth, and accurate.

It has patented material support which you can use for narrow rip cuts.

It has 28-1/2 inches rip capacity which can cut varieties of larger shelving and trim material with ease.

It features onboard storage which gives easy access to the Blade Guard Assembly, cord wrap, fence, miter gauge, push-stick, riving knife, and wrenches when not in use.
Compact folding stand

It has a Blade Guard Assembly which aids tool-free adjustments of the guard for different applications.

Comes with a flip-over fence that aids narrow rip cuts.

It has telescoping fence rails that retract to create a small, portable package.

Powered by a 15A high-torque motor, the D7490 has enough power to cut pressure-treated lumber and hardwoods.

For efficient dust extraction, this saw features a 2-1/2” dust collection port that connects seamlessly to a vacuum.

Variable cuts – cuts 3-1/8” depth at 90 degrees and 2-1/4” at 45 degrees.

It comes with a 21-7/8” by 26-3/8” table for superior material support.

– Amps: 15.0A
– Arbor Size: 5/8 inches
– Blade Diameter: 10 inches
– Max. Rip (Left): 12 inches
– Max. Rip (Right): 20 inches
– Max. Width (Dado): N/A
– No Load Speed: 3,850rpm
– Weight: 45 lbs.

– Amps: 15.0A
– Arbor Size: 5/8 inches
– Blade Diameter: 10 inches
– Max. Rip (Left): 12 inches
– Max. Rip (Right): 24 inches
– Max. Width (Dado): N/A
– No Load Speed: 4,800rpm
– Weight: 48 lbs.

– Amps: 15.0A
– Arbor Size: 5/8 inches
– Blade Diameter: 10 inches
– Max. Rip (Left): 16-1/2 inches
– Max. Rip (Right): 28-1/2 inches
– Max. Width (Dado): 13/16 inches
– No Load Speed: 4,800rpm
– Weight: 58 lbs.
Added Accessories:

– 10” 24-Tooth Carbide Blade
– Blade Guard
– Milter Gauge
– Push stick
Added Accessories:

– 10” 24-Tooth Carbide Blade
– Blade Guard
– Milter Gauge
– Push stick
Added Accessories:

– 10” 24-Tooth Carbide Blade
– 2x Blade Wrenches
– Blade Guard Assembly
– Foldable table saw stand
– Milter Gauge
– Push stick
– Rip Fence

– Perfect for home use
– Performs smooth cuts
– Very portable tool
– Durable power tool
– It has a large rip ability

– Great motor speed
– Steady, smooth, and seamless fence adjustment
– Comes with a blade guard and an anti-kickback system for safety

– Light and portable
– A wide range of rip capability
– Easy to set due to the convenient scissor stand
– Performs with utmost accuracy and fast

– It might be too small for some projects
– Some users complained that the miter gauge gave an inaccurate crosscut

– In-feed length not adequate for specific jobs
– The flat tracks of the unit cause pop out of the miter gauge
– Inconvenient off switch

– Some users complained of breakable plastic parts
– The fence-locking system requires intense pressure
– The scissor stand is fragile

How to Choose the Right One

As you study the features of a table saw you like, you should check all the facts and features as you would any other power tool. You need to look out for some features that make the device unique or makes it useful for the task at hand. If you buy a machine that could not handle the job, you end up wasting your time and money.

You should be aware of the varieties of table saws on the market – either online or offline. Your job load has a direct impact on the size of the table saw you buy. Importantly, be aware that a table saw as any tool would, stays for a long time with you.

Tools are not things you frequently buy, hence the need to research thoroughly to determine a durable and useful table saw to buy.

Choosing the right saw will go a long way in helping your home improvement or professional job. You must know the right features to consider before making your purchase. As a first-timer, shopping for your first table saw can be very confusing. However, the following factors can help you make the right choice:

Choosing by Type:

For you to select the right table saw, you must know the different available types. The four types of table saws available include:

Cabinet Table Saws:

These happen to be the most expensive table saws around. Being the heaviest, they stand well over six hundred pounds. A cabinet table saw comes with a smooth-surfaced table and a motor inside the cabinet. It also features a gearing and trunnions system for a perfect finish and heavy-duty jobs.

This saw can cut even the thickest stock of hardwood. Purposely built for professionals, this table saw can execute tough and prolonged heavy-duty woodwork. It occupies ample of space, hence it needs a dedicated area for that. If you have the space to play with and the cash to spend, this unit belongs to you.

Contractor Table Saws:

These table saws come with wheels and are lightweight for ease of mobility. If you work as a building contractor or craftsman, this saw will serve you well. If you are buying for home use, you can easily move it to and from your store for use.

However, if you are buying as a contractor, hauling it from your truck and setting it up becomes easy. The contractor table saw can cut as thick as 1/8 inch. It works with reduced vibration; as a result, yielding smooth cuts. The reduced vibration also makes for comfortable to use.

Hybrid Table Saws:

These table saws combine the features of a contractor table saw and that of a cabinet table saw. The hybrid table saw stands for versatility. It has the functionality of a contractor table saw, and the convenience of a cabinet table saw. It comes with a higher number of arbor bearings and trunnions.

This equipment comes with an advanced bearing system compared to the contractor saws. When you want it all, go for this table saw because some call it a better version of cabinet saws.

Portable Table Saws:

These table saws move easily making for better and easier You can store it easily because of their compact sizes – talk of convenience.

Although they come with a small induction motor, they can execute the same kind of work like the heavy-duty types. It has a compact universal motor that powers them, therefore, they are noisier and less powerful.

They, however, do not cut extremely hard or very thick wood. Also, they do lack precision therefore not suitable for specific woodwork that needs high accuracy. Thus, before you buy this type of saw, you should know your work need.

Choosing by Size/Weight:

After knowing the types of table saws available, next, consider the size and weight of the saw you decide to buy. Your available space determines the size of the unit to buy. If you have limited space, then consider buying one that will sit perfectly in the area you have.

The weight will decide if you can move the unit from place to place especially if you are the mobile contractor. Furthermore, if your jobs consist of heavy-duty and significant tasks, consider the heavy and stable type that will get the job done.

Choosing by Fence:

A fence affords you the ability for horizontal or vertical adjustments. A good rip fence should align with the blade always. When selecting a good table saw, check the fence to be sure it can glide smoothly across the rails. The fence locking mechanism must be perfect and convenient to make precise rip cuts.

Choosing by Safety Features:

A table saw falls into the category of the most dangerous power tools in a workshop, hence the need to ensure safety. There are different safety measures and features that accompany various saws such as flesh sensors, auto-reset switches, anti-kickback pawls, etc. Check before you buy to see the availability of these features – the price might go up with safety features installed.

Choosing by Motor Type

Motors power the table saw to make cuts, and without them, that power tool becomes useless. A high horse-powered motor delivers powerful cuts. Large motors equal to more power. When buying a table saw, be sure the motor can provide.

Why I Choose My DeWalt Table Saw?

I use a DeWalt DWE7480 that I bought before the new series came out. In this section, I am going to show you why I cherish it so much. DeWalt as a company has a wide range of table saws and whichever one you choose should serve you. It does not matter your profession – you will get a DeWalt that suits your project.

I chose to talk about the DWE 7480 because it happens to be my first table saw. It has worked for me for a while now and still does. The DWE 7480 falls into the category of the smaller models under that brand name yet gives value for money. Let us now see why I chose this bad boy. [1]

Quick Background Info

The DWE7480 comes with a 10-inch 24-tooth carbide blade that does the cuttings. Made from carbide – a tremendously hard substance, the blade can cut through any hardwood. No matter the wood condition, I never fret over if my DWE7480 cuts through seamlessly.

While cutting wood, the rack and pinion fence system also do their jobs. They keep the wood steady and flexible to achieve perfect cutting pieces always. My DWE7480 passes off as small but mighty because it can perform a 24.5-inch rip capacity. The capability makes it easy for me to saw significant pieces of wood effortlessly.

I easily move my DWE7480 around due to its lightweight, especially when traveling to the countryside. Finally, the unit comes with different accessories that make my job easy. The storage of the machine gives protection for the tools and components. The onboard storage also keeps me organized.

Since my DWE7480 does not come with a stand, I built a wood table and stand around it.

The Driving Force

When it comes to power, do not take anything away from my DWE7480. The driving force that makes the unit tick comes from a 15A motor. The motor runs at 4,800 RPM to tear wood apart seamlessly. Power and speed combine to make this bad boy versatile.

Making the Cut

I make bevel cuts from 0 degrees to 45 degrees like no other. The unit produces high-quality and accurate cuts due to the workings of the rack and pinion telescopic fence. I cannot speak enough of the fence as it happens to be one of the best around. Take it from me, DeWalt sure put a lot into this unit.


My DWE7480 can do a series of jobs including ripping large sheets of wood, fabrication, trimming, etc. It does all these jobs without occupying space – it sits pretty in my small workshop.

How to Use the DeWalt Table Saw Effectively

The table saw tool falls under the category of the most dangerous power tools around. Using it or any power tool requires care. However, before you start using this unit, follow the tips below:

  1. Put on protective eye, hearing, and respiratory equipment.
  2. Double-check the blade to ensure it fits firmly.
  3. Tighten the bevel angle and height lock knobs
  4. Lock the fence lever and make sure the fence is parallel to the blade when you want to rip.
  5. Lock the miter gauge knob tight you are crosscutting
  6. Attach the blade guard assembly properly
  7. Confirm the functioning of the anti-kickback assembly
  8. Check the blade guard assembly and riving knife for proper alignment
  9. Before you put on the machine, make sure both guards are in the down position in contact with the table.


After you have followed the above tips, now you can go to ripping proper. When you cut bevel, place the fence on the side of the blade so that the blade tilts away from the fence and hands. Feed the workpiece between the fence and the blade, however, if the wood stands at 6 inches or less between the fence and the blade, then use the push stick.

Follow These Steps for Ripping:

  1. Lock the fence by pressing the rail lock lever down. Remove the miter gauge.
  2. Lift the blade to about 1/8 inch above the top of the workpiece.
  3. Lay the workpiece flat on the table, and let it align with the fence. Keep the workpiece about 1 inch away from the blade.
  4. Turn on the saw and allow the blade to run for a while. With both hands carefully feed the workpiece slowly all the way through the saw blade. Push it continually until it falls off the rear of the table. Do not pull the workpiece back while the blade

Bevel Cuts

When bevel ripping, repeats the process above except that you need to set to an angle other than zero degrees. [2]

Care and Maintenance

Maintaining your power tool will prolong it to serve you well. Never neglect routine care and maintenance if you want to enjoy your device. We have put together tips to help you maintain your tool.

Importantly, before carrying out any repairs or maintenance, turn off the unit and disconnect the machine from the power source. After that, follow the steps below:

  1. Ensure that the gears, motor, adjustment angles as well as other parts are free of sawdust.
  2. Drive dirt and dust out of all air vents of your tool with clean, dry air at least once a week.
  3. Clean the blades using pitch and gum remover.
  4. Eliminate all resins on the tabletop using an oil lubricant and a fine.
  5. Avoid using solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. The substances may weaken the plastic materials. Use a cloth dampened only with water and mild soap but do not let any liquid get into the tool.
  6. If your tool needs any repairs, contact any qualified personnel.


Q: Will a DW7440 stand fit the DWE7480 or DW745 table saws?

A: No. The DW7440 stand will only fit the DW744 and DW744X table saws.

Q: I got a DEWALT tool from my uncle, but there is no parts list or manual. How can I get one?

A: You can get a parts list and manual for your DEWALT tool online either through Service Net or your email. Just follow the steps below:

  1. Go to
  2. Type the catalog or model number of the product you are looking for in the box, “find parts,” at the upper left-hand corner of the page
  3. Hit the “Search”
  4. Click on the item you want to view. Follow the information on the pop-out box to proceed
  5. After supplying the type number of your tool, you will see Exploded Art and Instruction Manual files in PDF.

Q: How do I install the blade guard on the DW745 10” Compact Job Site Table Saw?

A: If the need arises to install the blade guard here, follow the steps below:

  1. Remove the throat plate
  2. Raise the saw blade arbor to its maximum height by turning the blade height adjustment clockwise
  3. Unfasten the wingnut using a minimum of three complete turn
  4. Insert the splitter into the locking mechanism on the saw until the guard snaps into position. Drag the guard firmly to be sure it holds
  5. Tighten the wing nut against the locking mechanism

Q: What type of metal does the DEWALT table saw’s table contain?

A: The tables of the DWE7490X, DWE7491RS, DWE7480, DE744, and DW745 come with painted aluminum.

Q: Can I use a dado blade with the DWE7480 or DW745?

A: You definitely cannot use a dado blade with either of the two table saws. The arbor of either of them cannot accommodate the wider width of a dado blade due to the shortness of the arbor.


Now that you read our reviews and comparisons among the three range of DEWALT table saw – 745, 7480, and 7490, you should not be at a loss as to their uniqueness. All three of them are powerful and efficient with merits and demerits. Weighing these options should help you decide which to choose especially for you DeWalt fans.

Importantly, you should be aware that these are not the only DEWALT brand of table saws. The company has an extensive range of them which you can check out on Amazon. Their wide range allows just anybody to find the perfect combination of power, portability, safety, and price. Whichever one you choose, know that you are getting quality for your money.

Why Choose Us?

You have a lot of reasons to choose Morning Homestead one of which include delivering top-quality product reviews and research all the time. We give you oven-fresh and well-researched articles aimed at educating our population of readers. Our team of highly trained technical experts works around the clock to deliver prompt and current articles.

Do contact us for your product reviews. Also, you can read our other highly informative posts and do not forget to share them.

Please, read, comment, and share across all social networks.

Related Articles:

Leave a Comment